Precautions when using WellFlon™ PTFE non-stick conveyor belt and PTFE food conveyor belt of the tortilla machine!

Precautions when using the WellFlon™ PTFE non-stick conveyor belt and PTFE food conveyor belt of the tortilla machine!

WellFlon™ PTFE non-stick conveyor belt of the tortilla machine is made of non-toxic materials. It is non-toxic, odorless, and has a smooth surface. It is suitable for transporting food and food raw materials. The main material of the non-toxic food conveyor belt is PU type. Because PVCC., polyethylene, etc. contain ingredients that are harmful to the human body, PU type conveyor belts are basically used in the food industry.
Food conveyor belt materials PVC, polyethylene, polypropylene, polypropylene, PP, plastic steel ACETAL, PE, nylon, PA, etc., according to the specific food, there are corresponding special conveyor belts, such as: aquatic product conveyor belts require mesh water seepage, but also anti-corrosion and easy to clean.
Common food conveyor belts are: vegetable conveyor belts, leisure food conveyor belts, beer conveyor belts, seafood conveyor belts.

The maintenance of WellFlon™ PTFE non-stick conveyor belt and PTFE food conveyor belt:

When transporting and storing food conveyor belts, they should be kept clean, avoid direct sunlight or rain and snow soaking, prevent contact with acids, alkali oils, organic solvents and other substances, and be 1 meter away from the heating device. The temperature in the warehouse should be kept between -18℃-40℃, and the relative temperature should be kept between 50%-80% RH. During storage, the product should be rolled into a roll and should not be folded. During placement, it should be turned over once every quarter. Conveyor belts of different types, specifications, and layers should not be connected together, and the joints should be glued.

The type, structure, specification, and number of layers of the conveyor belt should be reasonably selected according to the conditions of use. The running speed of the conveyor belt should generally not be greater than 2.5 m/s. For materials with large block size and large wear and fixed plow unloading devices, the speed should be as low as possible. The diameter of the conveyor's drive roller and the closing, reciting roller, steering roller and supporting facilities of the conveyor belt cloth layer, as well as the requirements for the roller groove angle, should be reasonably selected according to the design regulations of the conveyor.

The feeding direction should be consistent with the running direction of the belt. In order to reduce the impact of the material on the belt when it falls, a chute should be used to reduce the material falling distance; the roller spacing should be shortened in the belt feeding section, and a buffer roller should be used. To prevent leakage, a soft and moderate baffle should be used on the belt side to avoid the baffle being too hard and scratching the conveyor belt surface.

Precautions when using the WellFlon™ PTFE non-stick conveyor belt and PTFE food conveyor belt for tortilla machine:
(1) Avoid the rollers being covered by materials, resulting in poor rotation, to prevent leakage from getting stuck between the roller and the belt, pay attention to the lubrication of the moving parts, but do not use oily conveyor belts;
(2) Avoid starting with load;
(3) When the belt deviates, take timely measures to correct it;
(4) If a local belt operation is found, it should be repaired in time to avoid expansion;
(5) Avoid the belt being blocked by the frame, pillars or block materials to prevent collision and tearing.